50, 100, 200, and 400 Gigabit Ethernet Test Plans
The test plans on this page may be downloaded and used for internal purposes only. The test plans may not be commercialized in any way without express permission of the UNH-IOL.
The 50, 100, 200, and 400 Gigabit Ethernet testing service currently offers the following test plans. These documents are constantly being updated to improve readability and to reflect the current specifications. Please contact us if you would like more information or have questions about the 50, 100, 200, and 400 Gigabit Ethernet testing service.
When testing based on the following test plans is performed, all reports generated will be digitally signed using an Adobe digital certificate. Upon reception of the report, the recipient can verify its authenticity using our document validation instructions.
IOL
Conformance
- Status
- Fully Documented (Active)
- Revision
- 1.0
- Testing Days Needed
- 1 week
- Last Modified
- 2019-04-24
- Abstract
- This suite of tests has been developed to help implementers evaluate the chip-to-chip electrical signaling characteristics of their 200GAUI-8 and 400GAUI-16 PHYs.
- Status
- Fully Documented (Active)
- Revision
- 1.0
- Testing Days Needed
- 1 week
- Last Modified
- 2019-04-24
- Abstract
- This suite of tests has been developed to help implementers evaluate the chip-to-module electrical signaling characteristics of their 200GAUI-8 and 400GAUI-16 PHYs.
- Status
- Fully Documented (Active)
- Revision
- 1.0
- Testing Days Needed
- 1 week
- Last Modified
- 2019-04-24
- Abstract
- This suite of tests has been developed to help implementers evaluate the chip-to-chip electrical signaling characteristics of their 200GAUI-4 and 400GAUI-8 PHYs.
- Status
- Fully Documented (Active)
- Revision
- 1.0
- Testing Days Needed
- 1 week
- Last Modified
- 2019-04-24
- Abstract
- This suite of tests has been developed to help implementers evaluate the chip-to-module electrical signaling characteristics of their 200GAUI-4 and 400GAUI-8 PHYs.
- Status
- Fully Documented (Active)
- Revision
- 5.3
- Testing Days Needed
- 3 days
- Last Modified
- 2015-06-04
- Abstract
- This test suite deals with Reception issues such as CRC Errors, Framing Errors, Length Errors, Fragments, etc. as well as Transmission issues, proper spacing, proper preamble and SFD, For Half Duplex devices this also includes collisions, deference, etc. This suite of tests has been developed to help implementers evaluate the functioning of their Clause 4 Media Access Control (MAC) based products. The tests do not determine if a product conforms to the IEEE 802.3, nor are they purely interoperability tests. Rather, they provide one method to isolate problems within a MAC device. Successful completion of all tests contained in this suite does not guarantee that the tested device will operate with other devices. However, combined with satisfactory operation in the IOL's interoperability test bed, these tests provide a reasonable level of confidence that the Device Under Test (DUT) will function well in most environments.
- Notes
- Previous versions of this test suite include: v4.1 v4.2 v4.3 v4.4 v4.5 v4.6, v5.0, v5.1, v5.2
1000BASE-X MAC Test Suites: v1.0, v2003_05_20.
- Status
- Fully Documented (Active)
- Revision
- 1.7
- Testing Days Needed
- 2 days
- Last Modified
- 2014-06-11
- Abstract
- This suite of tests has been developed to help implementers evaluate the functioning of their Clause 31 Flow Control (PAUSE) implementations. The tests do not determine if a product conforms to the IEEE 802.3, nor are they purely interoperability tests. Rather, they provide one method to isolate problems within an implementation. Successful completion of all tests contained in this suite does not guarantee that the tested device will operate with other devices. However, combined with satisfactory operation in the IOL's interoperability test bed, these tests provide a reasonable level of confidence that the Device Under Test (DUT) will function well in most environments.
- Notes
- Previous versions of this test suite include: v1997_JUNE, v1999_JULY, v1.0, v1.1, v1.2, v1.3, v1.5. v1.6.
- Status
- Fully Documented (Active)
- Revision
- 1.0
- Testing Days Needed
- 1 week
- Last Modified
- 2019-04-24
- Abstract
- This suite of tests has been developed to help implementers evaluate the electrical signaling characteristics of their 50GBASE-CR, 100GBASE-CR2, and 200GBASE-CR4 PHYs.
- Status
- Fully Documented (Active)
- Revision
- 1.0
- Testing Days Needed
- 2 week
- Last Modified
- 2020-01-27
- Abstract
- This suite of tests has been developed to help implementers evaluate the electrical signaling characteristics of their 50GBASE-KR, 100GBASE-KR2, and 200GBASE-KR4 PHYs.
Key
| Fully Documented |
| Draft |