IEEE 1588 Test Plans
The test plans on this page may be downloaded and used for internal purposes only. The test plans may not be commercialized in any way without express permission of the UNH-IOL.
The IEEE 1588 testing service currently offers the following test plans. These documents are constantly being updated to improve readability and to reflect the current specifications. Please contact us if you would like more information or have questions about the IEEE 1588 testing service.
When testing based on the following test plans is performed, all reports generated will be digitally signed using an Adobe digital certificate. Upon reception of the report, the recipient can verify its authenticity using our document validation instructions.
IOL
Conformance
- Status
- Draft (Active)
- Revision
- 0.0.7
- Testing Days Needed
- 2 week
- Last Modified
- 2014-01-10
- Abstract
- IEEE 1588 Default PTP Profiles Conformance Test Plan for IEEE 1588-2008: IEEE Standard Profile for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
- Status
- Fully Documented (Active)
- Revision
- v1.0.1
- Testing Days Needed
- 1 Week
- Last Modified
- 2017-06-01
- Abstract
- This service is only available to Avnu Alliance members. Please contact ptplab@iol.unh.edu for more information. Customers seeking Avnu Alliance Certification should consider membership in the UNH-IOL Avnu Certification Test Service.
- Status
- Draft (Active)
- Revision
- v1.0.0
- Testing Days Needed
- 2-week
- Last Modified
- 2019-02-21
- Abstract
- The 1588 Port Latency Test Plan focuses on the evaluation of a Port's egress and ingress latency in relation to the port's timestamping plane via direct measurement of the device under test (DUT). Currently 100Base-TX and 1000Base-T devices with an available 1PPS can be tested Devices lacking a 1PPS must support the Peer-to-Peer (AKA Pdelay) Delay measurement mechanism
- Status
- Fully Documented (Active)
- Revision
- Testing Days Needed
- 2 weeks
- Last Modified
- 2019-08-05
- Abstract
- Validation of the ITU G.8262 requirements for 100M, 1G and 10G
- Notes
- Requires use of the Paragon-X from Calnex
- Status
- Draft (Partially Implemented)
- Revision
- Testing Days Needed
- 2 weeks
- Last Modified
- 2019-08-05
- Abstract
- Draft of conformance test requirements for ITU-T G.8275.1
- Status
- Draft (Active)
- Revision
- Testing Days Needed
- 1 week
- Last Modified
- 2021-12-03
- Abstract
- Validation of Transparent Clock one-step correctionField modification with various encapsulations
- Status
- Draft (Active)
- Revision
- v1
- Testing Days Needed
- 3 Weeks
- Last Modified
- 2019-10-21
- Abstract
- Note this test plan is under update by the IEEE-SA ICAP and NIST for Power Profile conformance testing of IEEE/IEC 61850-9-3(2016) and IEEE C37.238-2017. Refer here for more information. This Power Profile Test Plan was developed with the assistance of a NIST Cooperative Agreement with input from the IEEE PSRC H24 committee for the Revision of IEEE Standard C37.238-2011. Please send comments and suggestions to ptplab@iol.unh.edu.
Interoperability
- Status
- Draft (Active)
- Revision
- 0.6
- Testing Days Needed
- 5 days
- Last Modified
- 2016-08-04
- Abstract
- This suite of tests defines a basic interoperability test for IEEE 1588 devices. The expansion of this test suite is in progress, with input from 1588 Consortium members. If interested in test details and/or contributing products to the growing interoperability test bed, please contact ptplab@iol.unh.edu
Performance
- Status
- Draft (Active)
- Revision
- Testing Days Needed
- Last Modified
- 2022-12-15
- Abstract
- This is offered to customers seeking to evaluate the resiliency of their PTP network when two GMs are present (Primary and Backup). Specific details of the testing are customized to the customer's needs and interests.
Key
| Fully Documented |
| Draft |