DSL Forum TR-100 Implemented Tests

DSL Forum TR-100 - Implemented Tests

The following is a list of the currently implemented tests taken from the DSL Forum TR-100 test plan. Tests that have been implemented are highlighted in Green text. Tests that have not yet been implemented are highlighted in Grey text.

Section 7 - Physical Layer Test Cases

7.1 Bitswap performance test
7.2 DSL Noise Spike/Surges Tests
- 7.2.1 Isolated noise burst test
- 7.2.2 Repetitive high level impulse noise (REIN) test
- 7.2.3 Common mode noise susceptibility test
7.3 Stress test
7.4 Verification of CRC error reporting by ATU-R (basic CRC functionality test)

Section 8 - Higher Layer Test Cases

8.1 RFC2684 Layer 3 Ethernet or USB Interface Bridge Mode
- 8.1.1 Packet throughput test
8.2 RFC2516 PPPoE throughput test
8.3 RFC2364 PPPoA End-to-End Connectivity Test
- 8.3.1 PPPoA
8.4 RFC2684 End-to-End Connectivity Test
- 8.4.1 Verify IP bridged
8.5 Usability Tests
- 8.5.1 Power cycle test

ANNEX A - PHYSICAL LAYER TEST CASES FOR SYSTEMS USING G.992.3 AND G.992.5 ANNEX A

ANNEX A.1 - North American Test Set

A.1.1 CPE margin verification test
A.1.2 Operation in the presence of impulse noise events
A.1.3 Verification of downstream bi/gi values
A.1.4 Loop tests with ports set for adaptive rate, automode operation
A.1.5 Loop tests with ports set for adaptive rate, single operating mode
A.1.6 Loop tests with ports set for fixed rate (not yet defined)
A.1.7 ADSL2plus coexistence with phoneline networking
A.1.8 REIN noise impairment

ANNEX A.2 - European Test Set

A.2.1 through A.2.8

ANNEX A.3 - ADS2plus European Tests Operating with DS-PSD Mask Above ADSL

A.3.2 through A.2.8

ANNEX B - PHYSICAL LAYER TEST CASES FOR SYSTEMS USING G.992.3/5 ANNEX B

ANNEX B.2 - Performance Test Set for ADSL2, Annex B

B.2.1 through B.2.6

ANNEX B.3 - Performance Test Set for ADSL2plus, Annex B

B.3.1 through B.3.8

* Line simulator compensation is not available for these tests.